gen room
This command generates a side-lit rectangular room model with
width, depth,
floor-floor, and floor-ceiling.
Options
-w- Window[s], starting x, z, width, height.
-n- Model name
-t-
Facade thickness.
-r/--rotate- Rotate the room counter-clockwise
Example
Generate a room that's 12 unit wide, 14 unit deep and 3 unit height.
Genearte the same room, adding two windows, each 4 unit wide and 1.5 unit in height. Viewing from outside, the lower left corner of the first window is 1 unit away from the left wall and 1 unit away from the floor.